FR4 QSFP-DD transceiver modules are designed for use in 400 Gigabit Ethernet links on up to 2km of single mode fiber. They are compliant with the QSFP-DD MSA, QSFP28 MSA, IEEE P802.3cu and portions of P802.3bs. Digital diagnostic functions are available via the I2C interface, as specified by the QSFP28 MSA and Finisar Application Note AN-21xx. The optical transceiver is RoHS compliant as described in Application Note AN-2038.

Features
● Hot-pluggable QSFP-DD type 2 form factor
● Supports 425Gb/s aggregate bit rate
● Power dissipation <10W (limited temp) or < 11W (c-temp)
● RoHS-6 compliant
● Case temperature range of 20°C to +60°C (limited temp) or 0°C to +70°C (c-temp)
● Single 3.3V power supply
● Aligned with IEEE P802.3cu
● 4x100Gb/s PAM4 serial lanes
● 8x50G PAM4 retimed 400GAUI-8 electrical interface
● LC duplex receptacle
● I2C management interface

Applications
● 400G FR4 applications with FEC

注：本產(chǎn)品有全國產(chǎn)化型號可選
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.