+86-028-85255257
Product Description
2.67G-SFP-120D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 32 dB, with in most cases is enough to reach about 120 km distance. Transceiver is CE/RoHS certified and it is Compliant with product safety standards. 2.67G-SFP-120D SFP Transceiver is fully compliant to SFP Multi Source Agreement INF-8074i. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide SFP transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and SFP transceiver EEPROM memory data validation tests.
Media Type: |
Single-Mode Fiber (SMF) |
---|---|
TX Wavelength: |
1550 nm. |
RX Wavelenght: |
1550 nm. |
Minimum Optical Budget: |
32 dB |
Maximum Distance: |
120km |
Supported Data Rate: |
100-2.67Gbps |
Supported Applications: |
Gigabit Ethernet (1.25 Gbps), 100M Ethernet (100Mbps), 2G Fiber Channel (2.125 Gbps), 1G Fiber Channel (1.0625 Gbps), STM-1 (155Mbps), STM-4 (622Mbps), STM-16 (2.488 Gbps), ODU0 (1.244Gbps), ODU1 (2.498Gbps), OTU1 (2.66Gbps), CPRI option 1 (614.4 Mbps), CPRI option 2 (1228.8 Mbps), CPRI option 3 (2.458 Gbps), OBSAI RP3 x 1 (768 Mbps), OBSAI RP3 x 2 (1.536 Gbps) |
DDM/DOM: |
Support |
Temperature Range: |
Standard 0°-70°C |
Connectors: |
Double LC |
Tx Wavelength Bandwidth: |
37 nm (1528-1565 nm) |
Rx Wavelength Bandwidth: |
37 nm (1528-1565 nm) |
Minimum Transmitting Power: |
-2 dB |
Maximum Transmitting Power: |
7 dB |
Receiver Sensitivity: |
-30 dBm |
Receiver Overload: |
-14 dBm |
Dispersion: |
2600-2700 ps/nm |
Transmitter Type: |
DFB Laser |
Receiver Type: |
APD Photodiode |
Power: |
+3.3V single power supply |
Chipset: |
MAXIM, MINDSPEED, SEMTECH |
Compliance: |
CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8074i, RoHS, SFP MSA |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.