+86-028-85255257
F- tone公司專業研發制造10G SFP+有源電纜、10G SFP+ Active Cable,符合MSA SFF-8431, 應用于10G以太網等數據中心互聯場景。100%完美兼容全系列品牌服務器,交換機,路由器,PDH/SDH傳輸設備,EPON,GPON,10G EPON,10G GPON,WDM PON基站等等全系列設備
SFP+ Direct Attach Active Copper Cables ,5m、7m、10m、12m Reach
Features
Applications
Product Description
The SFP+ active cable assemblies are high performance, cost effective I/O solutions for 10Gb Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability.
Recommended Operating Conditions
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Storage Ambient Temperature |
-40 |
+85 |
°C |
||
Operating Case Temperature |
Tc |
0 |
+70 |
°C |
|
Power Supply Voltage |
VCC3 |
3.14 |
3.3 |
3.47 |
V |
Power Dissipation |
PD |
0.5 |
W |
Systems
Performance |
Media |
Operating parameters |
10.5Gbps line speed, full duplex Bit error rate: better than 10E-12 |
Hot-pluggable, industry-standard Small Form-Factor Pluggable(SFP+) copper cable, available max 10m |
Supply voltage: 3.3V Power consumption(per end): max 0.5W |
Pin Descriptions
Pin |
Logic |
Symbol |
Name/Description |
Notes |
1 |
VeeT
|
Transmitter Ground
|
||
2 |
LV-TTL-O |
TX_Fault |
N/A |
1 |
3 |
LV-TTL-I |
TX_DIS |
Transmitter Disable |
|
4 |
LV-TTL-I/O |
SDA |
Tow Wire Serial Data |
|
5 |
LV-TTL-I |
SCL |
Tow Wire Serial Clock |
|
6 |
MOD_DEF0 |
Module present, connect to VeeT |
||
7 |
LV-TTL-I |
RS0 |
N/A |
1 |
8 |
LV-TTL-O |
LOS |
LOS of Signal |
|
9 |
LV-TTL-I |
RS1 |
N/A |
1 |
10 |
VeeR |
Reciever Ground |
||
11 |
VeeR |
Reciever Ground |
||
12 |
CML-O |
RD- |
Reciever Data Inverted |
|
13 |
CML-O |
RD+ |
Reciever Data Non-Inverted |
|
14 |
VeeR |
Reciever Ground |
||
15 |
VccR |
Reciever Supply 3.3V |
||
16 |
VccT |
Transmitter Supply 3.3V |
||
17 |
VeeT |
Transmitter Ground |
||
18 |
CML-I |
TD+ |
Transmitter Data Non-Inverted |
|
19 |
CML_I |
TD- |
Transmitter Data Inverted |
|
20 |
VeeT |
Transmitter Ground |
1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor
Ordering information
Part Number |
Product Description |
SFP-10GAC-5 |
SFP+ Direct Attach Active Cable(10GSFP+Cu), 5m, AWG:26, 0oC ~ +70oC |
SFP-10GAC-7 |
SFP+ Direct Attach Active Cable(10GSFP+Cu), 7m, AWG:24, 0oC ~ +70oC |
SFP-10GAC-10 |
SFP+ Direct Attach Active Cable(10GSFP+Cu), 10m, AWG:24, 0oC ~ +70oC |
SFP-10GAC-12 |
SFP+ Direct Attach Active Cable(10GSFP+Cu), 12m, AWG:24, 0oC ~ +70oC |
Note: You can be customized diameter and distance.
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be
specifically confirmed in writing by F-tone before they become applicable to any particular order or
contract. In accordance with the F-tone policy of continuous improvement specifications may change
without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.